Drying Programmes - Beko B3D512844UW User Manual

Whenever a new programme is selected,
the recommended spin speed of the selec-
ted programme is displayed on the Spin
Speed indicator. It is possible that the re-
commended spin speed value is not the
maximum spin speed that can be selected
for the current programme.
Press the Spin Speed Adjustment button to
change the spin speed. Spin speed de-
creases gradually.
Then, depending on the model of the
product, "Rinse Hold l_l " and "No Spin _"
options appear on the display.
If you are not going to unload your laundry
immediately after the programme com-
pletes, you can use Rinse Hold function in
order to prevent your laundry from getting
wrinkled when there is no water in the ma-
chine.
This function holds the laundry in the final
rinsing water. If you want to spin your laun-
dry after the Rinse Hold function:
1. Adjust the Spin Speed.
2. Press Start/Pause button. The pro-
gramme will resume. Machine drains
the water and spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do
not allow it.
Auxiliary function selection for drying:
When you select a new washing program,
press the Auxiliary Function Selection but-
ton to set the drying option suitable for this
program.
In programmes where drying set-
ting is not allowed, when the drying
auxiliary function button is pressed,
the drying light doesn't change and
a warning sound is heard.
For only drying programmes, set
the appropriate drying option by
pressing the Auxiliary Function Se-
lection button.

6.8 Drying Programmes

WARNING
The machine automatically cleans
the lint that from the laundry during
drying programme. The machine
uses water during drying. For this
reason, the water tap of the ma-
chine should also be open during
drying programmes.
When you select a new washing
program, press the Auxiliary Func-
tion Selection button to set the dry-
ing option suitable for this program.
In drying programmes, there is a spinning
step. Your machine performs this process
in order to shorten the drying duration.
When the drying programme is selected,
the spin speed setting is in the range of
Maximum spin speed.
In programmes that do not allow the drying
setting, when the Drying auxiliary function
button is pressed, the drying light will not
change and a warning noise will be heard.
For only drying programmes, set the appro-
priate drying option by pressing the Auxili-
ary Function Selection button.
In case of water outage, washing
and drying cannot be performed.
EN / 31