Advertisement
NO
Name
1
LVDS Connector
2
Operation LED
3
Key-Scan Connector
4
256k
5
Y Connector
6
X Connector
LE01 (Address Buffer Connector)
7
LE02 (Address Buffer Connector)
8
Power Fuse
9
Power Connector
10
Samsung Electronics
An input connector to receive LVDS encoded RGB, H, V, DATAEN, and DCLK signal
from the video board.
Shows the logic board properly receives Sync and clock signal.
(Normal: Blinks at 1 second interval)
A connector to connect key scan board checking and adjusting 24C16 data.
An EEPROM to save gamma table, APC table, drive signal timing and other options.
A connector to output Y drive board control signal.
A connector to output X drive board control signal.
A connector to output address data and control signal to the E, F buffer board.
A connector to output address data and control signal to the E, F buffer board.
A fuse connected to the power source (5V) input to the logic board.
A connector to supply power (5V) with the logic board.
Circuit Operation Description
Function
5-33
Advertisement
