Advertisement
4. Alignment and Adjustments
4-1 Service Mode
4-1-1 SERVICE MODE ENTRY METHOD (General Transmitter)
1. Turn off the power to make the SET STAND-BY mode.
2. In order to enter the Service Mode, select MUTE-1-8-2-POWER.
* In case entry into SERVICE MODE is unsuccessful, repeat the procedures above.
4-1-2 Initial DISPLAY State in times of SERVICE MODE Switch overs
4-1-2(A) OSD DISPLAY
MENU
1. PWS364
2. VPC3230
3. SDA9400
4. SDA9280
5. AD9884 - Video
6. AD9884 - DTV/PC
7. CXA2101Q-1
8. CXA2101Q-2
Release Time :
4-1-2(B) BUTTONS OPERATIONS WITHIN SERVICE MODE
Menu
Joystick UP/DOWN
Joystick (LEFT/RIGHT)
Samsung Electronics
9. Pinp Control
10.OSD Position
11. Test Pattern
12. Option Table
13.Reset
Entire menu display
Cursor move to select items
Enable to increase and decrease the data of the selected items
Alignment and Adjustments
4-1
Advertisement
