Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Outdoor Storage
  5. 1500001
  6. Assembly instructions manual

Lifetime 1500001 Assembly Instructions Manual

Vertical storage shed
Hide thumbs Also See for 1500001:

Advertisement

Quick Links

Download this manual
VERTICAL
STORAGE SHED
MODEL #60091
MODEL 60300
ITM. / ART. 1500001
BEFORE ASSEMBLY:
• Assemble on a level surface
• 2 people are recommended for setup
For customer service in the United Kingdom and continental Europe:
É-mail: cs@lifetimeproducts.eu
FOR DOMESTIC OUTDOOR USE ONLY!
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
TOOLS REQUIRED
Electric Drill
QUESTIONS?
CONTACT LIFETIME CUSTOMER SERVICE:
Call: 1-800-225-3865
7:00 am–5:00 pm (Monday–Friday) MST
and 9:00 am–1:00 pm Saturday MST
ADC #2 Phillips Bit
(Included)
Live Chat: www.lifetime.com
(click on "LIVE CHAT" tab)
Video Instructions:
www.youtube.com/lifetimeproducts
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
FRS 1/4" (6,4 mm) Drill Bit
(Included)
ARA 1/8" (3,2 mm) Drill Bit
(Included)
MODEL# AND PRODUCT ID
Model Number: 60300
Product ID:
TABLE OF CONTENTS
Icon Legend...................................................4
Warnings & Notices......................................5
Parts Identifi er..............................................6
Floor & Wall Assembly..................................7
Door Assembly.............................................23
Wall Hook Installation.................................42
Shed Anchoring...........................................44
Cleaning & Care..........................................50
Registration..............................................51
Warranty....................................................52
(you will need both when contacting us)

Advertisement

loading
Need help?

Need help?

Do you have a question about the 1500001 and is the answer not in the manual?

Questions and answers

Related Manuals for Lifetime 1500001

Summary of Contents for Lifetime 1500001

  • Page 1 Pour le français, voir la page 2. Para el español, ver la página 3. VERTICAL STORAGE SHED MODEL #60091 MODEL 60300 ITM. / ART. 1500001 BEFORE ASSEMBLY: • Assemble on a level surface • 2 people are recommended for setup For customer service in the United Kingdom and continental Europe: É-mail: cs@lifetimeproducts.eu...
  • Page 2 Phillips n° 2 (Incluse) Perceuse électrique ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME t’Chat en direct: www.lifetime.com N° DE MODÈLE ET RÉFÉRENCE DU PRODUIT Composer le 1-800-225-3865 (il faut avoir les deux au moment de nous contacter) (cliquer sur la languette «...

  • Page 3: Table Of Contents

    ARA 1/8 in (3,2 mm) Broca (Incluida) (Incluida) Taladro eléctrico ¿PREGUNTAS? ® PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME Chat en vivo: www.lifetime.com MODEL E ID DEL PRODUCTO Marcar : 1-800-225-3865 (se necesitan los dos al contactarnos) Número de modelo: 60300 (cliquer en la lengüeta «LIVE CHAT»)

  • Page 4: Leyenda De Íconos

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts to be used for a section. •...

  • Page 5: Advertencias Y Avisos

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. •...
  • Page 6 PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Plastic Parts / Pièces en plastique Piezas de plástico AGQ (x1) ANC (x1) AGZ (x1) ANA (x2) AGN (x1) AGY (x1) AGO (x1) Metal Parts / Pièces en métal Piezas de metal FEI (x1) FEJ (x2) Holes /...
  • Page 7 FLOOR & WALL ASSEMBLY / ASSEMBLAGE DU PLANCHER ET DES PORTES / ENSAMBLE DEL PISO Y LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Blister Pack / Blister Blíster EXO (x8) ADV (x14) ADZ (x26) ADW (x10) CHK (x2) ADC (x1) AHS (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS...
  • Page 8 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Lay the Left Side Wall Panel (AGN) face down on level ground, and insert a Wall Square Tube (FEJ) (one with just two holes—one at each end) into the bottom of the Panel until a few inches hang out the bottom.
  • Page 9 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x2) • Insert an End Cap (AHS) into the end of the Tube, and continue inserting the Tube until the Cap is flush with the bottom of the Panel.
  • Page 10 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Lay the Floor Panel (ANC) down on level ground, and insert the three center tabs at the bottom of the Right Wall Panel (AGY) into the slots in the Floor panel.
  • Page 11 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Fold the edges of the Panel. Tilt the Panel to locate the end tabs over the slots in the Floor Panel. Insert the tabs into the slots. •...
  • Page 12 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the three tabs at the bottom of the right Rear Wall Panel (ANA) into the 2nd, 3rd, and 4th slots from the right corner of the Floor panel.
  • Page 13 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Align the six holes along the edges of the Panels, and secure the Panels together with six (6) Screws (ADZ).
  • Page 14 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Insert the three tabs at the bottom of the second Rear Wall Panel (ANA) into the 2nd, 3rd, and 4th slots from the left corner of the Floor panel.
  • Page 15 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 1.10 • Repeat steps 1.4–1.6 for the Left Side Wall Panel (AGN). • Répéter les étapes 1.4 – 1.6 pour le panneau mural latéral gauche (AGN).
  • Page 16 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x10) ARA (x1) 1.11 • Flip the assembly on its back, and insert a Screw (ADW) through each of the tabs underneath the Floor Panel as shown.
  • Page 17 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 1.12 • Stand the assembly upright. Align the holes in the Support Channel (FEF) with those along the groove just to the right of the seam between the two Rear Wall Panels.

  • Page 18: Ensamble De Las Puertas

    u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • One edge of the Roof Panel has six (6) small holes along a thick border as indicated below. This edge goes at the front of the cabinet, just above the Doors.
  • Page 19 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) 1.13 • Orient the Roof Support (FEI) as shown, and set it against the front edge of the Roof Panel. Insert six (6) Screws (ADV) to secure it in place.
  • Page 20 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EXO (x8) 1.14 • Flip the assembly upright, and set the Roof Panel down onto the Wall Panels being sure to orient the Panel so the metal Roof Support is over the opening.
  • Page 21 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x2) ADZ (x2) 1.15 • Secure the Roof Support to the right Side Wall Panel using one (1) screw (CHK) and one (1) screw (ADZ) as shown. The screw (CHK) is self-tapping (it has the tip of a drill bit).
  • Page 22 u SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) 1.16 • Secure the Roof Panel to the right Side Wall Panel using four (4) Screws (ADV) at the places indicated. Insert the Screws at an angle.
  • Page 23 DOOR ASSEMBLY / ASSEMBLAGE DES PORTES / ENSAMBLE DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Small Parts & Hardware Box / Boîte de petites pièces et quincaillerie Caja de piezas pequeñas y herraje Hardware Bag / Sac de quincaillerie Bolsa de herraje Blister Pack /...
  • Page 24 DOOR ASSEMBLY / ASSEMBLAGE DES PORTES / ENSAMBLE DE LAS PUERTAS PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Plastic Parts / Pièces en plastique Piezas de plástico AGO (x1) AGZ (x1) TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO ADC (x1) FRS (x1) 7/16 in/po...
  • Page 25 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po 11 mm ACA (x2) AEB (x2) AAB (x2) FGM (x1) LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA •...
  • Page 26 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Set the Lateral Door Channel (FEM) into the groove along the edge of the Door, and align the four holes indicated. •...
  • Page 27 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x3) ADW (x1) BYZ (x2) • Connect two Handle Pieces (BYS & BYR) together. • Joigner deux pièces de la poignée (BYS et BYR) l’une l’autre. •...
  • Page 28 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXW (x6) DWJ (x3) • These Screws (DXW) go through the Hinge, Door, and through the holes in the Channel. Start with the center Hinge. •...
  • Page 29 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA •...
  • Page 30 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Using a 1/4" (6 mm) bit, drill just into these two divots—but not completely through the Door. •...
  • Page 31 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x1) 2.10 • Insert a Square Tube (FEK) into the hole at the bottom of the Door until it hangs out a few inches. •...
  • Page 32 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 2.12 • Now, drill completely through the Door and Square Tube using the 1/4" (6,4 mm) bit. Use the holes in the Square Tube as a guide.
  • Page 33 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po 11 mm BQP (x2) ACA (x2) AAB (x4) AEB (x4) FGN (x1) EDA (x1) 2.13 •...
  • Page 34 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AEE (x3) ADW (x1) BYZ (x2) 2.14 • Connect two Handle Pieces (BYS & BYR) together. •...
  • Page 35 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXW (x6) DWJ (x3) 2.16 • These Screws (DXW) go through the Hinge, Door, and through the holes in the Channel. Start with the center Hinge. •...
  • Page 36 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1) DUL (x6) 2.17 • Align the holes in the hinges on the Right Door with the divots on the Right Wall Panel, and secure the Door to the Cabinet using six (6) Screws (DUL).
  • Page 37 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DUL (x6) 2.18 • Repeat the last step for the Left Door. • Répéter l’étape précédente pour la porte gauche. •...
  • Page 38 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po 11 mm 2.19 • Close the Doors and, if necessary, raise or lower the Left Door Latch Bracket to align it with the Latch. Hold it in place, and open the Left Door and tighten the two (2) Nuts.
  • Page 39 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 2.20 • Open the Left Door. Set the Left Door Inner Channel (FEL) in the groove along the edge of the Door, and align the six (6) holes along the Channel with the six (6) divots in the Door.
  • Page 40 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 2.21 • While holding the Channel tight against the Door, insert six (6) Screws (ADZ) to secure the Channel in place. •...
  • Page 41 u SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1) CHK (x4) ARA (x1) 2.22 DGS (x1) DGR (x1) • Secure a Deadbolt (DGR & DGS) to the top and bottom of the Door at the locations shown. You can drill first and then insert the Screws.
  • Page 42 WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS MURAUX / INSTALACIÓN DES GANCHOS MURALES ACCESSORIES REQUIRED / ACCESSOIRES REQUIS / ACCESORIOS REQUERIDOS Accessory Bag / Sac d’accessoires Bolsa de accesorios EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS NO PARTS REQUIRED FOR THIS SECTION AUCUNE PIÈCE REQUISE POUR CETTE SECTION NINGUNA PIEZA REQUERIDA PARA ESTA SECCIÓN TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 43 u SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EDL (x6) • Insert the six (6) Wall Hooks (EDL) into any of the notches in the Wall Panels (Wall Panels or Side Wall Panels). Then push downward to lock them in place.

  • Page 44: Anclaje De La Casita

    SHED ANCHORING / ANCRAGE DE LA REMISE / ANCLAJE DE LA CASITA HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO Hardware Bag / Sac de quincaillerie Bolsa de herraje COB (x2) ADW (x2) FHK (x2) ACB (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO ARA (x1) ADC (x1)
  • Page 45 u SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x2) FHK (x2) • Attach the Wall Brackets to the back of the Roof at the following locations: •...
  • Page 46 u SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS COB (x2) ACB (x2) ARA (x1) • Drill holes in the wall, and gently tap the Screw Anchors (COB) into the holes until flush with the wall. If drilling directly into studs, do not use the anchors.
  • Page 47 NOTES / REMARQUES / NOTAS...
  • Page 48 NOTES / REMARQUES / NOTAS...
  • Page 49 NOTES / REMARQUES / NOTAS...

  • Page 50: Limpieza Y Cuidado

    CLEANING & CARE Congratulations on your Lifetime product purchase. By following the instructions below, your new Lifetime product should provide you with years ® of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.
  • Page 51 REGISTER today! ENREGISTRER CE PRODUIT EN LIGNE À WWW.LIFETIME.COM Chez Lifetime®, nous nous engageons à fournir des produits innovateurs de qualité. Lors de votre inscription, vous aurez l’occasion de nous faire parvenir vos commentaires. Votre opinion est importante pour nous.
  • Page 52 THE MANUFACTURER RESERVES THE RIGHT TO MAKE SUBSTITUTIONS TO WARRANTY CLAIMS IF PARTS ARE UNAVAILABLE OR OBSOLETE. 1. Lifetime vertical storage sheds are warranted to the original purchaser to be free from defects in material or workmanship for a period of fi ve years from the date of original retail purchase. The word “defects” is defi ned as imperfections that impair the use of the product.
  • Page 53 2. Cette garantie n’est pas transférable et est expressément limitée à la réparation ou au remplacement du produit défectueux. Si le produit est déclaré défectueux selon les termes de cette garantie, Lifetime Products, Inc. réparera ou remplacera les parties défectueuses gratuitement pour l’acheteur. Les frais d’expéditions aller et retour de l’usine ne sont pas couverts et sont à la charge de l’acheteur.

  • Page 54: Garantía

    6. Esta garantía se otorga en reemplazo expreso de toda otra garantía, expresa o implícita, incluidas las garantías de comercialización o adaptación para el uso en la medida permitida por las leyes federales y estatales. Ni Lifetime Products, Inc., ni ninguno de sus representantes asume ninguna otra responsabilidad en conexión con este producto. Esta garantía le otorga derechos legales específi cos, y usted puede tener otros derechos que varían de estado a estado...
  • Page 55 IMPORT INFORMATION / IMPORTATIONS / INFORMACIÓN DE IMPORTACIONES Distributed by: Imported by / Importé par : Costco Wholesale Corporation Costco Wholesale Canada Ltd.* 415 W. Hunt Club Road P.O. Box 34535 Seattle, WA 98124-1535 Ottawa, Ontario K2E 1C5, Canada 1-800-774-2678 1-800-463-3783 www.costco.com www.costco.ca...
  • Page 56 7:00 am–5:00 pm (M–F) MST and 9:00 am–1:00 pm Saturday MST (English) ® AMÉLIORER VOTRE ACHAT LIFETIME EN AJOUTANT DES ACCESSOIRES OU DES AUTRES PRODUITS Pour acheter des accessoires ou des autres produits Lifetime , visiter le : ® www.lifetime.com Ou composer au 1-800-424-3865 Du lundi au vendredi 7 h –...

This manual is also suitable for:

60300