1. Manuals
  2. Brands
  3. Lifetime Manuals
  4. Outdoor Storage
  5. 60300U
  6. Assembly instructions manual

Lifetime 60300U Assembly Instructions Manual

Vertical storage shed
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VERTICAL
STORAGE SHED
MODEL 60300U
ITM. / ART. 1500001
BEFORE ASSEMBLY:
• Assemble on a level surface
• At least 2 people are recommended for setup
THIS ITEM IS INTENDED FOR OUTDOOR DOMESTIC USE ONLY! NOT FOR
COMMERCIAL USE.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
TOOLS REQUIRED
Electric Drill
QUESTIONS?
Call: 1-800-225-3865
(English, French, Spanish)
ADC #2 Phillips Bit
(Included)
CONTACT LIFETIME CUSTOMER SERVICE:
Live Chat:
www.lifetime.com/customerservice/home
(click on "LIVE CHAT" tab)
ASSEMBLY INSTRUCTIONS
Pour le français, voir la page 2. Para el español, ver la página 3.
FRS 1/4" (6,4 mm) Drill Bit
(Included)
ARA 1/8" (3,2 mm) Drill Bit
(Included)
For Customer Service in mainland
Europe and the United Kingdom:
E-mail: csinternational@lifetime.com
TABLE OF CONTENTS
Icon Legend...................................................4
Warnings & Notices......................................5
Parts Identifi er..............................................6
Floor & Wall Assembly..................................7
Door Assembly.............................................23
Shed-to-Wall Anchoring..............................42
Door Alignment...........................................45
Wall Hook Installation.................................47
Cleaning & Care..........................................50
Registration..............................................51
Warranty....................................................52
Model Number: 60300U
Product ID:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 60300U and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Lifetime 60300U

Summary of Contents for Lifetime 60300U

  • Page 1 ADC #2 Phillips Bit ARA 1/8" (3,2 mm) Drill Bit Warranty............52 (Included) (Included) Electric Drill QUESTIONS? Model Number: 60300U CONTACT LIFETIME CUSTOMER SERVICE: Product ID: Call: 1-800-225-3865 For Customer Service in mainland Live Chat: Europe and the United Kingdom: (English, French, Spanish) www.lifetime.com/customerservice/home...
  • Page 2 (Incluse) (Incluse) Perceuse électrique N° de pièce : 60300U ® QUESTIONS ? CONTACTER AUX SERVICES À LA CLIENTÈLE LIFETIME Référence du produit : Pour les services à la clientèle du Composer le 1-800-225-3865 Entretien en direct: continent européen: (anglais, français, espagnol) www.lifetime.com/customerservice/home...

  • Page 3: Table Of Contents

    (Incluida) (Incluida) Taladro eléctrico Número de pieza: 60300U ® ¿PREGUNTAS? PONERSE EN CONTACTO CON LOS SERVICIOS DE CLIENTES LIFETIME ID del producto: Chat en vivo: Llamar : 1-800-225-3865 Para el servicio a clientes en el continente europeo: Correo electrónico: www.lifetime.com/customerservice/home (inglés, francés, español)

  • Page 4: Leyenda De Íconos

    ICON LEGEND / LÉGENDE DES ICÔNES / LEYENDA DE ÍCONOS • Indicates special heed should be taken when reading. • Indique qu’une attention spéciale doit être portée à la lecture. • Indica que uno debe prestar atención al leer. • Indicates the parts/no parts required for a section. •...

  • Page 5: Advertencias Y Avisos

    WARNINGS & NOTICES / AVERTISSEMENTS ET AVIS / ADVERTENCIAS Y AVISOS English: • Failure to follow these warnings may result in serious injury or property damage and will void warranty. • To ensure safety, do not attempt to assemble this product without following the instructions carefully. •...

  • Page 6: Identifi Cador De Piezas

    PARTS IDENTIFIER / IDENTIFICATEUR DE PIÈCES / IDENTIFICADOR DE PIEZAS Plastic parts / Pièces en plastique Piezas de plástico AGQ (x1) ANC (x1) ANA (x2) AGN (x1) AGY (x1) AGO (x1) AGZ (x1) Metal parts / Pièces en métal Piezas de metal FEI (x1) FEJ (x2) Hole /...

  • Page 7: Ensamble Del Piso Y De Los Muros

    FLOOR & WALL ASSEMBLY / ASSEMBLAGE DU PLANCHER ET DE MURS / ENSAMBLE DEL PISO Y LOS MUROS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO EXO (x8) ADV (x14) ADX (x10) ADZ (x26) CHK (x2) ADC (x1) AHS (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal...
  • Page 8 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Lay the Left Side Wall Panel (AGN) face down on level ground. While another adult holds the Panel in place, insert a Wall Square Tube (FEJ) into the square hole at the bottom of the Panel until a few inches hang out the bottom.
  • Page 9 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x2) • Insert an End Cap (AHS) into the end of the Tube, and continue inserting the Tube until the Cap is fl ush with the bottom of the Panel.
  • Page 10 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Lay the Floor Panel (ANC) down on level ground, and insert the three center tabs at the bottom of the Right Wall Panel (AGY) into the slots in the Floor panel.
  • Page 11 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Fold the edges of the Panel. Tilt the Panel to locate the end tabs over the slots in the Floor Panel. Stand the Wall Panel upright while inserting the tabs into the slots.
  • Page 12 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Insert the three tabs at the bottom of the right Rear Wall Panel (ANA) into the 2nd, 3rd, and 4th slots from the right corner of the Floor panel.
  • Page 13 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Align the six holes along the edges of the Panels. While another adult presses against the back of the Panel, secure the Panels together with six (6) Screws (ADZ).
  • Page 14 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) • Insert the three tabs at the bottom of the second Rear Wall Panel (ANA) into the 2nd, 3rd, and 4th slots from the left corner of the Floor panel.
  • Page 15 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 1.10 • Repeat steps 1.4–1.6 for the Left Side Wall Panel (AGN). This step is easier with two adults. Ensure you secure this Panel to the Rear Panel using six (6) Screws (ADZ).
  • Page 16 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADX (x10) ARA (x1) 1.11 • Flip the assembly on its back, and insert a Screw (ADX) through each of the tabs underneath the Floor Panel as shown.
  • Page 17 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 1.12 • Stand the assembly upright. Align the holes in the Support Channel (FEF) with those along the groove just to the right of the seam between the two Rear Wall Panels.
  • Page 18 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • One edge of the Roof Panel has six (6) small holes along a thick border as indicated below. This edge goes at the front of the cabinet, just above the Doors.
  • Page 19 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x6) 1.13 • Orient the Roof Support (FEI) as shown, and set it against the front edge of the Roof Panel. While another adult holds the Support tight against the Panel, insert six (6) Screws (ADV) to secure it in place.
  • Page 20 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EXO (x8) 1.14 • Flip the assembly upright, and set the Roof Panel down onto the Wall Panels being sure to orient the Panel so the metal Roof Support is over the opening.
  • Page 21 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS CHK (x2) ADZ (x2) 1.15 • While another adult pulls down on the Roof to hold it in place, secure the Roof Support to the right Side Wall Panel using one (1) screw (CHK) and one (1) screw (ADZ) as shown.
  • Page 22 SECTION 1 (CONTINUED) / SECTION 1 (SUITE) SECCIÓN 1 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADV (x8) 1.16 • While another adult pulls down on the Roof to hold it in place, secure the Roof Panel to the right Side Wall Panel using four (4) Screws (ADV) at the places indicated.

  • Page 23: Ensamble De Las Puertas

    DOOR ASSEMBLY / ASSEMBLAGE DES PORTES / ENSAMBLE DE LAS PUERTAS HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO ADW (x1) FGM (x1) DXW (x6) ADZ (x8) DWJ (x3) BYZ (x2) DUL (x12) FRS (x1) DGS (x1) DGR (x1) AEE (x3) CHK (x4) GIN (x2) AEB (x2)
  • Page 24 DOOR ASSEMBLY / ASSEMBLAGE DES PORTES / ENSAMBLE DE LAS PUERTAS PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS Metal parts / Pièces en métal / Piezas de metal Top end / Extrémité supérieure / Extremo superior Holes / Trous / Agujeros FEK (x1) FEL (x1)
  • Page 25 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) GIN (x2) AEB (x2) AAB (x2) FGM (x1)* LEFT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE GAUCHE / ENSAMBLE DE LA PUERTA IZQUIERDA •...
  • Page 26 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) • Set the Lateral Door Channel (FEM) into the groove along the edge of the Door. The notch fi ts over the nub. •...
  • Page 27 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x1) BYZ (x2) AEE (x3) • Connect the two Handle Pieces (BYS & BYR) together. • Joigner les deux pièces de la poignée (BYS et BYR) l’une l’autre. •...
  • Page 28 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXW (x6) DWJ (x3)* • These Screws (DXW) go through the Hinge, Door, and through the holes in the Channel. Start with the center Hinge. •...
  • Page 29 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x4) RIGHT DOOR ASSEMBLY / ASSEMBLAGE DE LA PORTE DROITE / ENSAMBLE DE LA PUERTA DERECHA •...
  • Page 30 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • Using a 1/4" (6,4 mm) bit, drill just into these two divots—but not completely through the Door. •...
  • Page 31 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS AHS (x1) 2.10 • Insert a Square Tube (FEK) into the hole at the bottom of the Door until it hangs out a few inches. •...
  • Page 32 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 2.12 • Now, drill completely through the Door and Square Tube using the 1/4" (6,4 mm) bit. Use the holes in the Square Tube as a guide.
  • Page 33 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) BQP (x2) AEB (x4) FGN (x1)* GIN (x2) AAB (x4) EDA (x1)* 2.13 •...
  • Page 34 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x1) BYZ (x2) AEE (x3) 2.14 • Connect two Handle Pieces (BYS & BYR) together. • Joigner deux pièces de la poignée (BYS et BYR) l’une l’autre. •...
  • Page 35 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DXW (x6) DWJ (x3)* 2.16 • These Screws (DXW) go through the Hinge, Door and through the holes in the Channel. Start with the center Hinge. •...
  • Page 36 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARA (x1) ADC (x1) DUL (x6) 2.17 • Align the holes in the hinges on the Right Door with the divots on the Right Wall Panel, and secure the Door to the Cabinet using six (6) Screws (DUL).
  • Page 37 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS DUL (x6) 2.18 • Repeat the last step for the Left Door. • Répéter l’étape précédente pour la porte gauche. •...
  • Page 38 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 7/16 in/po (≈11 mm) 2.19 • Close the Doors and, if necessary, raise or lower the Left Door Latch Bracket to align it with the Latch. Hold it in place, open the Left Door and tighten the two (2) Nuts.
  • Page 39 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS 2.20 • Open the Left Door. Set the Left Door Inner Channel (FEL) in the groove along the edge of the Door, and align the six (6) holes along the Channel with the six (6) divots in the Door.
  • Page 40 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADZ (x6) 2.21 • While holding the Channel tight against the Door, insert six (6) Screws (ADZ) to secure the Channel in place. •...
  • Page 41 SECTION 2 (CONTINUED) / SECTION 2 (SUITE) SECCIÓN 2 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADC (x1) CHK (x4) ARA (x1) DGS (x1)* DGR (x1)* 2.22 • Secure a Deadbolt (DGR & DGS) to the top and bottom of the Door at the locations shown. You can drill fi rst and then insert the Screws.

  • Page 42: Anclaje De La Casita Al Muro

    SHED-TO-WALL ANCHORING / ANCRAGE DE LA REMISE AU MUR / ANCLAJE DE LA CASITA AL MURO HARDWARE REQUIRED / QUINCAILLERIE REQUISE / HERRAJE REQUERIDO COB (x2) ADW (x2) FHK (x2) ACB (x2) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO ARA (x1) ADC (x1)
  • Page 43 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ADW (x2) FHK (x2)* • Attach the Wall Brackets to the back of the Roof at the following locations: •...
  • Page 44 SECTION 3 (CONTINUED) / SECTION 3 (SUITE) SECCIÓN 3 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS ARA (x1) COB (x2) ACB (x2) • Drill holes in the wall, and gently tap the Screw Anchors (COB) into the holes until fl ush with the wall. If drilling directly into studs, do not use the anchors.

  • Page 45: Alineamiento De Las Puertas

    DOOR ALIGNMENT / ALIGNEMENT DES PORTES / ALINEACIÓN DE LAS PUERTAS HARDWARE REQUIRED / HERRAJE REQUERIDO / QUINCAILLERIE REQUISE PARTS REQUIRED / PIEZAS REQUERIDAS / PIÈCES REQUISES EUG (x2) TOOLS REQUIRED / INSTRUMENTAL REQUERIDO / OUTILS REQUIS...
  • Page 46 SECTION 4 (CONTINUED) / SECTION 4 (SUITE) SECCIÓN 4 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS • If the Doors are not level, follow the steps below to even them out. • Si les portes ne sont pas de niveau l’une avec l’autre, suivre les étapes ci-dessus pour les niveler. •...

  • Page 47: Instalación De Los Ganchos Murales

    WALL HOOK INSTALLATION / INSTALLATION DES CROCHETS MURAUX / INSTALACIÓN DE LOS GANCHOS MURALES ACCESSORIES REQUIRED / ACCESSOIRES REQUIS / ACCESORIOS REQUERIDOS EDL (x6) PARTS REQUIRED / PIÈCES REQUISES / PIEZAS REQUERIDAS TOOLS REQUIRED / OUTILS REQUIS / INSTRUMENTAL REQUERIDO...
  • Page 48 SECTION 5 (CONTINUED) / SECTION 5 (SUITE) SECCIÓN 5 (CONTINUACIÓN) TOOLS & HARDWARE REQUIRED / OUTILS ET QUINCAILLERIE REQUIS INSTRUMENTAL Y HERRAJE REQUERIDOS EDL (x6)* • Insert the six (6) Wall Hooks (EDL) into any of the notches in the Wall Panels (Wall Panels or Side Wall Panels). Then push downward to lock them in place.
  • Page 49 NOTES / REMARQUES / NOTAS...

  • Page 50: Limpieza Y Cuidado

    ® product purchase. By following the instructions below, your new Lifetime product should provide you with years of service and enjoyment. The polyethylene panels are stain and solvent resistant. Most stains can be removed using a mild soap and a soft-bristled brush.

  • Page 51: Registro

    à des tiers, et ne leur permettra pas d’utiliser vos données personnelles à leurs propres fi ns. Nous vous invitons à lire notre politique de confi dentialité à www.lifetime.com (en anglais seulement) ENREGISTRER CE PRODUIT aujourd’hui! REGISTRAR EL PRODUCTO EN LÍNEA EN WWW.LIFETIME.COM...
  • Page 52 This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fi tness for use to extent permitted by Federal and state law. Neither Lifetime Products, Inc., nor any representative assumes any other liability in connection with this product. This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.
  • Page 53 à cette condition et aucun représentant de la société ne peut renoncer à l’application de cette politique ou la modifi er. Ce produit n’est pas destiné à des fi ns institutionnelles ou commerciales; Lifetime Products, Inc. n’assume aucune responsabilité à cet égard. Toute utilisation institutionnelle ou commerciale annule la garantie.

  • Page 54: Garantía

    NO ESTÁN DISPONIBLES O SON OBSOLETAS. El comprador original recibe una garantía de que los productos de césped y jardín de Lifetime están libres de defectos de material o mano de obra durante un período de 5 años a partir de la fecha de compra original al por menor. La palabra “defectos”...
  • Page 55 IMPORT INFORMATION / IMPORTATIONS / INFORMACIÓN DE IMPORTACIONES Importado por: Distributed by: Costco Wholesale Corporation Importadora Primex S.A. de C.V. Blvd. Magnocentro No. 4 P.O. Box 34535 Seattle, WA 98124-1535 San Fernando La Herradura Huixquilucan, Estado de México C.P. 52765 1-800-774-2678 www.costco.com RFC: IPR-930907-S70...
  • Page 56 Pour acheter des accessoires ou des autres produits Lifetime , visiter le : www.lifetime.com Ou composer le 1-800-424-3865 ® MEJORAR LA COMPRA DE LIFETIME AGREGANDO ACCESORIOS U OTROS MARAVILLOSOS PRODUCTOS Para comprar accesorios u otros productos de Lifetime®, visitarnos en: www.lifetime.com O marcar al 1-800-424-3865 1235671_C 4/12/2024...

This manual is also suitable for:

1500001

Table of Contents