▪ 2-ports, 10/25Gb Ethernet (SFP28) + 2-ports 32Gb FC (SFP+)
▪ 2-ports, 32Gb Fiber Channel, SFP+
DO NOT plug in the power cords.
Option 2: Cable a switched cluster
Cable your network connections and your cluster interconnect ports for a switched cluster.
You must have contacted your network administrator for information about
connecting the system to the switches.
Be sure to check the illustration arrow for the proper cable connector pull-tab orientation.
As you insert the connector, you should feel it click into place; if you do not
feel it click, remove it, turn turn the cable head over and try again.
About this task
You can use the graphic or the step-by step instructions to complete the cabling between the
controllers and to the switches.
Steps
1. Cable the cluster interconnect ports e0a to e0a and e0b to e0b with the cluster
interconnect cable:
20