Toro 03672 Operator's Manual page 20

Lower Mow/Raise Control Lever
This lever (Figure 21) raises and lowers the cutting
units and also starts and stops the cutterheads
when the cutterheads are enabled in the mow mode.
The cutter heads cannot be lowered when the
mow/transport lever is in the transport position.
Headlight Switch
Pivot the switch downward to turn on the headlights
(Figure 21).
Backlap Levers
Use the backlap levers in conjunction with the lower
mow/raise control lever for backlapping the reels
(Figure 22).
Figure 22
1. Backlap levers
Hydraulic Filter Restriction
Indicator
With the engine running at normal operating
temperature, view the indicator
be in the Green zone. When the indicator is in the
Red zone, change the hydraulic filters.
1. Hydraulic filter restriction indicator
Power Point
The power point is a 12 volt power supply for
electronic devices
g021209
1. Power point
20
(Figure 23), it should
Figure 23
(Figure 24).
Figure 24
g004132
g004133