PROAIM QR-WV-710 Assembly Manual

Quick release mount for freefly movi, dji ronin/m/mx camera gimbals

Quick Release Mount for Freefly MOVI, DJI

Ronin/M/MX Camera Gimbals

(QR-WV-710)

A s s e m b l y M a n u a l

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed

below.

3 x Allen Key L type

Quick Release Mount

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

statutes or in writing by the Publisher.

Table of Contents

Need help?

Do you have a question about the QR-WV-710 and is the answer not in the manual?

Page 1 Quick Release Mount for Freefly MOVI, DJI Ronin/M/MX Camera Gimbals (QR-WV-710) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Quick Release Mount Setup • remove bowl from (Not Included), remove both bolts from the bottom, as shown in the image. • Loosen both bolts from the bottom of the Quick Release Mount using the Allen key. • After loosening the bolts, remove them. •...
Page 3 • The Quick release can also be mounted from the bottom side of the Jib (Not Included), as shown in the image. • After inserting the bolts, tighten them using the Allen key. • Unlock the locking lever of the Quick release and slide the Gimbal (Not Included) pushing its button.
Page 4 YOUR PROAIM QUICK RELEASE MOUNT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.