Philips AVENT SCD881 User Manual page 32

VIDEO DISPLAY
Why isn't there any
image on the video
display while the link light
is green?
Why isn't the image on
the video display clear?
General information
Rechargeable Li-ion battery (2600 mAh)
Wi-Fi frequency band: IEEE 802.11 b/g/n 2.4 GHz.
Maximum radio-frequency power: <=20 dBm
Supply unit:
Model: ASSA105x-050100
x = E (EU plug) / x = B (UK plug)
x = C (AU plug) / x = J (BR plug)
Input: 100-240 V~, 50/60 Hz, 0.35 A
1.0 A, 5.0 W
Output: 5�0 V
Average active efficiency: >73.6 %
No-load power consumption: < 0�10 W
The parent unit may be in the Audio, Vox or Eco mode. Press the mode
button on the right side of the parent unit to switch modes (see section
'Modes')�
The display brightness may be set too low� Increase the display brightness
on the parent unit using the control button in the centre (see section
'Brightness')�
Perhaps the lens of the baby unit is dirty� Clean the lens with a dry cloth�
The baby unit may be too far away from your baby� Make sure the
baby unit is not further than 1�5 meters / 5 feet away from your baby
for optimal video quality� Closer than 1 meter / 3�5 feet increases
strangulation hazard�
- 32 -