Table of Contents
Advertisement
HOW TO USE / CONNECTING THE UNITS
The parent unit does not
respond, what should I
do?
INDICATIONS ON THE PARENT UNIT
Question
The battery LED on the
parent unit turns red�
What should I do?
Why does the parent unit
beep?
What does the battery
LED colour (green,
orange, red) or no
burning LED mean for the
status of my battery?
You can reset the parent unit by simultaneously pressing the on/off
button and the navigation down button for about 1 second� The parent
unit will switch off. To turn the parent unit back on, press the on/off
button one more time. Specific user information stored in the memory
of the parent unit, such as time, user mode, brightness settings, volume,
soothing sound selection, and zoom selection, will be retained.
Answer
The battery power is low� If you do not connect the parent unit to
the mains power when the battery LED has turned red and starts to
make a beeping sound, the unit will stop working after approximately
60 minutes.
Switch to lower brightness and/or volume to save battery consumption
and connect the parent unit to the mains with the power adapter� (see
chapter 'Preparing for use')�
Your baby monitor beeps in a certain way to tell you what the problem is�
1 beep: parent unit is switched off.
1 beep, every 10 seconds for the first 3 minutes, after that, every minute:
parent unit is low in battery�
1 beep, every 20 seconds: connection between parent and baby
unit is lost, link icon is shown on the parent unit's screen and the link
connection button is red�
When the parent unit is connected to the mains power the color of the
battery light will show:
* Green: battery is full.
* Orange: battery is charging�
When the parent unit is not connected to the mains power the color of
the battery light will show:
* Red: battery is almost empty (<10 %)
* No burning LED: parent unit is not connected to the mains�
- 29 -
Advertisement
Table of Contents
