Reassembly - Graco Lube Pro 24Z020 Instructions Manual

27. Use a pick to remove the bushing (35) and u-cup
seal (36) (F . 26).
IG
F . 26
IG
28. Use a smooth, long brass or aluminum rod, free of
sharp edges and burrs, to push the check valve
assembly (19) out of the outlet tube (14) (F
19
F . 27
IG
29. Dispose of the check valve assembly (19) accord-
ing to all regulations for proper disposal.
3A4033J

Reassembly

Use all of the new parts included in the repair / service
kit even if the old parts do not appear to be worn or
damaged and dispose of the old parts according to all
regulations for proper disposal.
1. Install u-cup seal (36) with lips facing up, and bush-
35
36
F
IG
Check Valve Assembly (19)
. 27).
IG
2. Coat the new check valve assembly (19) with a thin
3. Use a smooth, long brass or aluminum rod, free of
14
F
IG
ing (35) in air cylinder (3) (F
36
. 28
layer of grease.
sharp edges and burrs, to push the check valve
assembly (19) into place in the outlet tube (14)
(F . 29).
IG
19
. 29
Repair
. 28).
IG
35
14
19