Pro-Form TRAINER 8.7 User Manual page 17

17. Remove the 5/16" Nut (33) and the 5/16" x 2 1/4"
Bolt (11) from the bracket on the Latch Crossbar
(30).
Align the upper end of the Storage Latch (71)
with the bracket on the Latch Crossbar (30), and
insert the 5/16" x 2 1/4" Bolt (11) through the
bracket and the Storage Latch. This will push a
spacer (M) out of the Storage Latch; discard
the spacer.
Next, tighten the 5/16" Nut (33) onto the
5/16" x 2 1/4" Bolt (11). Do not overtighten the
Nut; the Storage Latch (71) must be able to
pivot.
Then, lower the Frame (48) (see HOW TO
LOWER THE TREADMILL FOR USE on
page 29).
18. Firmly tighten the four 3/8" x 1 1/4" Screws
(3) and the four 3/8" x 3/4" Screws (4).
Next, set the Right Base Cover (79) onto the
lower end of the Right Upright (73). Then, slide
the Right Upright Cover (77) downward and
press it onto the Right Base Cover.
Next, set the Left Base Cover (78) onto the lower
end of the Left Upright (72). Then, slide the Left
Upright Cover (76) downward and press it onto
the Left Base Cover.
17
33 M
48
18
73
77
4
3
3
17
30
11
71
72
76
3, 4
79
78