Pro-Form TRAINER 8.7 User Manual page 11

6. Have a second person lift the right side of the
Upright Base (81) slightly while you attach a
Wheel (13) with a 3/8" x 1 3/8" Bolt (9) and a
3/8" Nut (10). Make sure that the Wheel can
turn freely.
Attach the other Wheel (not shown) in the
same way.
7. Remove the wire tie (A) from the Upright Wire
(74).
Next, identify the Left Upright Cover (76).
Carefully pull the Left Upright Cover open just
enough to slide it around the Left Upright (72)
as shown. Slide the Right Upright Cover (77)
around the Right Upright (73) in the same way.
Then, slide the Upright Covers down to the floor.
6
10
13
7
72
11
81
9
76
73
77
74
A