Main work
–
Check the throttle cable routing. (
–
Position the fuel tank and fit the two spoilers to the sides in
front of the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
W00345-11
–
Attach the fuel tank breather hose.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Plug in fuel pump connector
W00342-11
–
Position the horn with the horn bracket.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
W00344-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
W00347-11
–
Remove the wash cap set.
–
Clean the quick release coupling thoroughly with compressed
air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
W00348-10
Silicone spray (
–
Join quick release coupling
SERVICE WORK ON THE CHASSIS 12
p. 87)
1
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
2
.
3
.
M6
10 Nm (7.4 lbf ft)
3
.
M6
10 Nm (7.4 lbf ft)
p. 155)
4
.
81