KTM 500 EXC F 2024 Owner's Manual page 135

–
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
H05065-10
magnet
–
Remove screws
ring.
H05066-10
–
Pull oil filter
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surface.
H05067-10
–
Lay the motorcycle on its side and fill the oil filter housing to
about ⅓ full with engine oil.
–
Insert the new oil filter into the oil filter housing.
–
Oil the O-ring of the oil filter cover and mount it together with
oil filter cover
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
H05068-10
–
Stand the motorcycle upright.
–
Remove filler plug
oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
H01713-10
–
Mount and tighten the filler plug together with the O-ring.
SERVICE WORK ON THE ENGINE 18
3
with the O-ring.
M20x1.5
1
with the magnet and a
M12x1.5
5
. Take off the oil filter cover with the O-
6
out of the oil filter housing.
7
.
M6x16
8
with the O-ring, and fill up with engine
1.2 l (1.3 qt.)
15 Nm (11.1 lbf ft)
20 Nm (14.8 lbf ft)
10 Nm (7.4 lbf ft)
Engine oil
(SAE 10W/50)
( p. 152)
133