Dangerous Goods Regulations; General Technical Data Of The Product - Leica Geosystems iCON iCR70 User Manual

Table of Contents

Advertisement

7.10.4
Dangerous Goods
Regulations
7.11
System Accuracy
64
Type
Antenna
WLAN
Internal PIFA antenna

Dangerous Goods Regulations

Many products of Leica Geosystems are powered by Lithium batteries.
Lithium batteries can be dangerous under certain conditions and can pose a
safety hazard. In certain conditions, Lithium batteries can overheat and ignite.
When carrying or shipping your Leica product with Lithium batteries
onboard a commercial aircraft, you must do so in accordance with
the IATA Dangerous Goods Regulations.
Leica Geosystems has developed Guidelines on "How to carry Leica
products" and "How to ship Leica products" with Lithium batteries.
Before any transportation of a Leica product, we ask you to consult
these guidelines on our web page
(http://www.leica-geosystems.com/dgr) to ensure that you are in
accordance with the IATA Dangerous Goods Regulations and that the
Leica products can be transported correctly.
Damaged or defective batteries are prohibited from being carried or
transported onboard any aircraft. Therefore, ensure that the condi-
tion of any battery is safe for transportation.

General Technical Data of the Product

Several factors can influence the system's accuracy for determining the loca-
tion of a prism:
Internal ATR/ATRplus accuracy
Angular accuracy of the instrument
Type and centring accuracy of the prism
Selected EDM measuring program
External measuring conditions
Therefore, the overall pointing accuracy of the determined point location can
be lower than the given angular accuracy and the ATR/ATRplus accuracy.
The following paragraphs provide a short overview of these influencing factors
and their possible intensities.
Angular accuracy
The accuracy of angular measurements depends on the instrument type. The
angular accuracy for total stations is typically in the range from 0.5² to 5². The
resulting error depends on the measurement distance.
Angular accuracy
1² (iCR80S only)
*
Orthogonal to the line of sight.
Refer to the data sheet of the respective instrument model for
information about the angular accuracy.
Gain
−0.66 dBi
*
Possible deviation
at 100 m distance
~0.5 mm
~1.0 mm
~2.5 mm
Technical Data

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icon icr80s

Table of Contents