Table of Contents
Advertisement
2.
ROG Extension connector (18-1 pin ROG_EXT)
This connector is for the OC Panel I/II, Front Base, and other ROG devices.
•
•
3.
Thermal sensor cable connector (2-pin T_SENSOR1)
This connector is for the thermistor cable that monitors the temperature of the devices
and the critical components inside the motherboard. Connect the thermistor cable
and place the sensor on the device or the motherboard's component to detect its
temperature.
To monitor the temperature at the BIOS, go to BIOS>Monitor>Temperature Monitor.
1-26
The Front Base is purchased separately.
Visit www.asus.com for more information about the OC Panel and Front Base.
Chapter 1: Product Introduction
Advertisement
Table of Contents
