Table of Contents
Advertisement
12.
ATX power connectors (24-pin EATXPWR; 8-pin EATX12V_1; 4-pin EATX12V_2;
4-pin EZ_PLUG)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
•
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 450 W.
•
Do not forget to connect the 4-pin/8-pin EATX12 V power plug; otherwise, the system
will not boot.
•
Connect the 4-pin EZ_PLUG power plugs to ensure sufficient power when you install
multiple graphics cards.
•
Use of a PSU with higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
•
If you want to use two or more high-end PCI Express x16 cards, use a PSU with at
least 1000W of output power to ensure system stability.
ASUS RAMPAGE V EDITION 10
1-33
Advertisement
Table of Contents
