Table of Contents
Advertisement
Repair
6.
If logo is single letters logo:
1. Stick logo on the dedicated position of door (1).
2. Move hand roller (e.g. rubber-coated steel roller or hard rubber roller) 3-4
times over the logo (2).
7.
Adhesive takes time to build up liability!
1. Wait 10 min (1).
2. Carefully remove protective foil (2).
Single letter logo is installed.
2020-08-03_58300000002379_ara_en_p
Copyright by BSH Hausgeräte GmbH
Page 70 of 73
Advertisement
Table of Contents
