INDEX INDICE ENGLISH SAFETY AND OPERATING PRECAUTIONS DESCRIPTION CONNECTION INSTALLATION NOTES ABOUT CONSTANT VOLTAGE SYSTEMS SPECIFICATIONS ITALIANO AVVERTENZE PER LA SICUREZZA E PRECAUZIONI D’USO DESCRIZIONE COLLEGAMENTO INSTALLAZIONE NOTE SUI SISTEMI A TENSIONE COSTANTE DATI TECNICI...
Page 4
RCF S.p.A. will not assume any responsibility for the incorrect installation and / or use of this product. SAFETY AND OPERATING PRECAUTIONS 1.
Page 5
9. RCF S.P.A. strongly recommends this product is only installed by professional qualified installers (or specialised firms) who can ensure a correct installation and certify it according to the regulations in force. The entire audio system must comply with the current standards and regulations regarding electrical systems.
RCF S.P.A. THANKS YOU FOR PURCHASING THIS PRODUCT, WHICH HAS BEEN DESIGNED TO GUARANTEE RELIABILITY AND HIGH PERFORMANCE. DESCRIPTION DP 5EN is a 20 W weatherproof sound projector in compliance with EN 54-24 standard. Main features: ABS cabinet with steel mesh grille.
Page 7
WHITE (2.5 W) YELLOW (5 W) CERAMIC BLUE (10 W) SCREW TERMINAL 8Ω 100 V RED (20 W) BLACK (COM) 2. Insert the connecting cable either (if used in wall) behind and through the mounting plate or (if external) through a hole on its cover. 3.
Missing or daMaged parts that could reduce the safety of the installation DP 5EN sound projectors can be installed both indoors and outdoors. 1. Fix the mounting plate to the wall (at a height of at least 1.5 m / 5 feet from the floor) with suitable wall plugs (with 4.5 mm screw).
Page 9
NOTES ABOUT CONSTANT VOLTAGE SYSTEMS The loudspeaker input voltage (Vd) shall correspond to the amplifier output voltage (Va). The sum of nominal power values (Pd x n) of all loudspeakers connected to the line shall not exceed the amplifier power (Pa). Make sure all loudspeakers are connected in phase to ensure a correct sound reproduction.
SPECIFICATIONS Input voltage: 100 V Power (selectable): 20 W – 10 W – 5 W – 2.5 W (100 V) Input impedance: 500 Ω (20 W) 1 kΩ (10 W) 2 kΩ (5 W) 4 kΩ (2.5 W) Frequency response (–10 dB): 100 Hz ÷...
Page 11
All EN54-24:2008 standard requirements are verified in the RCF S.p.A. manufacturing plant site in Via Raffaello Sanzio 13, 42124 Reggio Emilia, ITALY. The Declaration of Performance is available on the RCF website (www.rcf.it), in the DOWNLOADS section of the product page.
Page 12
Verificare inoltre l’idoneità del supporto (es. parete, soffitto, struttura, ecc.) e dei componenti utilizzati per il fissaggio (tasselli, viti, staffe non fornite da RCF, ecc.) che devono garantire la sicurezza dell’impianto / installazione nel tempo, anche considerando, ad esempio, vibrazioni meccaniche normalmente generate da un...
Page 13
9. La RCF S.P.A. raccomanda vivamente che l’installazione di questo prodotto sia eseguita solamente da installatori professionali qualificati (oppure da ditte specializzate) in grado di farla correttamente e certificarla in accordo con le normative vigenti. Tutto il sistema audio dovrà essere in conformità con le norme e le leggi vigenti in materia di impianti elettrici.
REALIZZATO IN MODO DA GARANTIRNE L’AFFIDABILITÀ E PRESTAZIONI ELEVATE. DESCRIZIONE DP 5EN è un proiettore di suono con potenza 20 W, resistente agli agenti atmosferici e conforme alla norma EN 54-24. Presenta le seguenti caratteristiche: corpo in ABS con griglia in acciaio;...
Page 15
BIANCO (2,5 W) GIALLO (5 W) MORSETTIERA BLU (10 W) CERAMICA 8Ω 100 V ROSSO (20 W) NERO (COM) 2. Inserire il cavo di collegamento (se incassato a parete) dietro e attraverso la piastra di fissaggio oppure (se esterno) tramite un foro da effettuarsi sulla sua calotta.
Mancanti o danneggiate che possono ridurre la sicurezza dell installazione Il proiettore di suono DP 5EN può essere installato sia in ambienti chiusi sia all’aperto. 1. Fissare la piastra metallica alla parete (ad un’altezza di almeno 1,5 m dal pavimento) tramite tre tasselli adatti (con vite di 4,5 mm).
Page 17
NOTE SUI SISTEMI A TENSIONE COSTANTE La tensione d’ingresso del diffusore (Vd) deve corrispondere con la tensione d’uscita dell’amplificatore (Va). La somma delle potenze nominali di tutti i diffusori (Pd x n) collegati alla linea non deve superare quella dell’amplificatore (Pa). Per garantire una corretta riproduzione audio, effettuare il collegamento di tutti i diffusori “in fase”.
DATI TECNICI Tensione d'ingresso: 100 V Potenza (selezionabile): 20 W – 10 W – 5 W – 2,5 W (100 V) Impedenza d'ingresso: 500 Ω (20 W) 1 kΩ (10 W) 2 kΩ (5 W) 4 kΩ (2,5 W) Risposta in frequenza (–10 dB): 100 Hz ÷...
Page 19
Tutti i requisiti di conformità alla normativa EN54-24:2008 sono verificati nello stabilimento produttivo di RCF S.p.A., Via Raffaello Sanzio 13, 42124 Reggio Emilia, ITALY. La Dichiarazione di Prestazione è disponibile sul sito web RCF (www.rcf.it), nella sezione DOWNLOADS della pagina del prodotto.
Page 20
Except possible errors and omissions. RCF S.p.A. reserves the right to make modifications without prior notice. Salvo eventuali errori ed omissioni. RCF S.p.A. si riserva il diritto di apportare modifiche senza preavviso. HEADQUARTERS: RCF S.p.A. Italy tel. +39 0522 274 411 e-mail: info@rcf.it...
Need help?
Do you have a question about the DP 5EN and is the answer not in the manual?
Questions and answers