Download Print this page

Craftsman 944.511573 Instruction Manual page 3

Lawn edger attachment

Advertisement

stopped and spark p lug w ire isdiscon-
nected (or powerhead
isdisconnected
from power source) when r emoving
jammed material from the cutting
blade. Donot g rab orhold attachment
bythe cutting blade.
• Dress properly.
Always wear safety
glasses orsimilar eye protection
when
operating,
orperforming
maintenance
onyour unit ( safety glasses are avail-
able). Eye protection
should be
marked Z87.
• Always wear face ordust mask i fop-
eration isdusty.
• Always wear hea W ,long p ants, long
sleeves, boots, and gloves.
• Always wear foot p rotection.
Do not
gobarefoot
orwear sandals.
• Secure hair a bove shoulder
length.
Secure orremove loose c lothing or
clothing with loosely hanging
ties,
straps, tassels, etc. T hey c an be
caught inmoving parts.
• Being f ully c overed also helps protect
you from debris and pieces oftoxic
plants thrown byspinning
blade.
• Stay a lert. Donot o perate when y ou
are tired, ill, u pset, orunder the influ-
ence o falcohol, drugs, ormedication.
Watch what you are doing; use com-
mon sense.
• Wear hearing protection.
• Never start orrun inside aclosed
room orbuilding.
Breathing
exhaust
fumes can kill.
• Keep h andles free ofoiland fuel.
• Only o perate unit w ith handlebar
installed.
• Keep h ands and feet a way f rom cut-
ting area.
• Never direct discharge
ofmaterial
to-
ward b ystanders
nor a llow anyone
near the area o foperation.
Use care
indirecting
discharge
toavoid g lass
enclosures,
automobiles,
and the like.
FUEL SAFETY
(for gas powerheads)
• Mix and pour fuel outdoors.
• Keep away from sparks or flames.
• Use a container approved for fuel.
• Do not smoke or allow smoking near
fuel or the powerhead.
• Avoid spilling fuel or oil. Wipe up all
fuel spills before starting the power-
head.
• Move at least 10 feet (3 meters) away
from fueling site before starting power-
head engine.
• Stop engine and allow to cool before
removing fuel cap.
• Remove fuel cap slowly.
ELECTRICAL
SAFETY
(for electric
powerheads)
'_&WARNING:
Avoid a dangerous
environment.
To reduce the risk of elec-
trical shock, do not use in rain, in damp
or wet locations, or around swimming
pools, hot tubs, etc. Do not expose to
snow, rain, or water to avoid the possi-
bility of electrical shock. Do not use on
wet surfaces. Do not handle extension
cord plug or unit with wet hands.
• Use only a voltage supply as shown
on the nameplate
of the unit.
• Avoid dangerous
situations.
Do not
use in presence of flammable
liquids
or gases to avoid creating a fire or
explosion
and/or causing damage to
unit.
• Avoid dangerous
environments.
Do
not use in unventilated
areas or
where dust or explosive
vapors can
build up.
• To reduce the risk of electric shock,
the powerhead
may have a polar-
ized plug (one blade is wider than
the other); if so, it will require the use
of a polarized
extension
cord. The
appliance
plug will fit into a polarized
extension
cord only one way. If the
plug does not fit fully into the exten-
sion cord, reverse the plug. If the
plug still does not fit, obtain a correct
polarized
extension
cord. A polar-
ized extension
cord will require the
use of a polarized
wall outlet. This
plug will fit into the polarized
wall
outlet only one way. If plug does not
fit fully into the wall outlet, reverse
the plug. If it still does not fit, contact
a qualified electrician
to install the
proper wall outlet. Do not change
the equipment
plug, extension
cord
receptacle,
or extension
cord plug in
any way.
• To reduce risk of electrical
shock,
use extension
cords specifically
marked as suitable for outdoor ap-
pliances having electrical
rating not
less than the rating of unit. Cord
must be marked with suffix "W-A"
(in
Canada
"W"). Make sure your exten-
sion cord is in good condition.
In-
spect extension
cord before use and
replace if damaged.
Do not use a
damaged
cord. Cord insulation
must
be intact with no cracks or deteriora-
tion. Plug connectors
must be un-
damaged.
The extension
cord used
to reach the power source must be
heavy enough to carry current from
the power source the full length of the

Advertisement

loading
Need help?

Need help?

Do you have a question about the 944.511573 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

C944.511573