Reading Data Arrays - MSA FieldServer ProtoNode FPC-N34 Startup Manual

11.3 Reading Data Arrays

• Connect to the ProtoNode with a browser and click on the Diagnostics & Debugging button.
• Select the User Messages branch.
• Select the info tab.
• See which profile has been loaded.
◦ Example: prof1b.csv
• In the address bar of the browser, type the IP address/filename.
◦ Example: 192.168.1.24/prof1b.csv
• Press the enter key and save the file.
• Open the file and go to the server side map descriptors section.
• The map_descriptor_name, data_array_name, and data array_offset will be shown for each point.
• Go back to the browser and select the view branch.
• Select the data arrays branch.
• Select the data array that corresponds with the point that you want to monitor.
• View the offset that corresponds with the point that you want to monitor.
ProtoNode Start-up Guide 34