MSA FieldServer ProtoNode FPC-N34 Startup Manual page 21

• Additional text will expand below the warning, click the underlined text to go to the IP Address. In the example below
this text is "Proceed to <FieldServer IP> (unsafe)".
• When the login screen appears, put in the Username (default is "admin") and the Password (found on the label of the
FieldServer).
NOTE: There is also a QR code in the top right corner of the FieldServer label that shows the default unique
password when scanned.
NOTE: A user has 5 attempts to login then there will be a 10-minute lockout. There is no timeout on the
FieldServer to enter a password.
NOTE: To create individual user logins, go to Section
21
11.5 Change User Management
ProtoNode Start-up Guide
Settings.