Secure Your Wireless Network - TRENDnet TEW-929DRU User Manual

TRENDnet User's Guide
possible connection speed. TRENDnet recommends setting your router to this
encryption standard. If you find that one of your wireless network devices does not
support WPA3 encryption, then set your router to either WPA2 or WPA encryption.
• WPA2/WPA3-Personal: This setting provides the router with the ability to detect
wireless devices using either WPA2 or WPA3 encryption. Your wireless network will
automatically change the encryption setting based on the first wireless device
connected.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported. Below is brief
comparison chart of the wireless security types and the recommended
configuration depending on which type you choose for your wireless network
Security
Standard WPA
802.11a/b/g
(802.11ac/802.11
n devices will
operate at
Compatible 802.11g/802.11a
Wireless to connect using
Standards this standard)
Highest
Performance
Under This
Setting Up to 54Mbps
Encryption
Strength Medium
TKIP or AES,
Additional
Preshared Key or
Options
RADIUS
TKIP
Recommended
Preshared Key
Configuration
8-63 characters
*Dependent on the maximum 802.11n/ac/ax data rate
supported by the device (150Mbps, 300Mbps, 450Mbps,
867Mbps, 1.3Gbps, 2.4Gbps, or 4.8Gbps)
© Copyright 2023 TRENDnet. All Rights Reserved.
WPA2 WPA3
802.11a/b/g/n/ac IEEE 802.11 n/ac/ax
Up to 450Mbps Up to 600Mbps
(11n) and up to (11n) and up to
1.3Gbps (11ac)* 1.2Gbps (11ax)*
High Highest
TKIP or AES,
Preshared Key or
RADIUS
AES
AES AES
Preshared Key Preshared Key
8-63 characters 8-63 characters

Secure your wireless network

Network > Wireless 2.4GHz / 5GHz1 / 5GHz2
By default, your router is pre-configured with wireless network names (SSIDs) and a
wireless encryption key using WPA2-PSK (AES). The predefined wireless network name
and security can be found on the sticker on the side of the router or on the device label
at the bottom of the router. The following sections involve changing the default wireless
security settings and encryption key.
1. Log into your router management page (see
on page 6).
2. Click on Network and click on the wireless band you would like to configure, Wireless
2.4GHz / 5GHz1.
3. Under Interface Configuration and in the Wireless Security tab, click on the
Encryption drop-down list to select your wireless security type.
TEW-929DRU
"Access your router management page"
33