Table of Contents
Advertisement
TRENDnet User's Guide
VPN Router A Configuration
1. Log into your router management page (see
on page 6).
2. Click on Network, click VPN, and click the IPsec tab.
3. Under Overview, enter a tunnel name and click Add. (e.g. Tunnel1)
4. Click the Connection type drop-down list and select Site-to-Site.
5. Click the Authentication type drop-down list and select IPSec IKEv2 PSK.
6. In the Local field, enter the local WAN1 IP address. (e.g. 10.10.10.10) This can also be
a domain name (ex: dynamic DNS host name)
© Copyright 2023 TRENDnet. All Rights Reserved.
"Access your router management
page"
7. In the Local subnet field, enter the local LAN IP subnet. (e.g. 192.168.10.0/24) You
can add additional local subnets by click the add icon
8. In the Remote field, enter the remote WAN1 IP. (e.g. 10.10.10.20) This can also be a
domain name (ex: dynamic DNS host name)
9. In the Remote subnet field, enter the remote LAN IP subnet. (e.g. 192.168.100.0/24)
and click Apply. You can add additional local subnets by click the add icon
192.168.120.0/24)
TEW-929DRU
(e.g. 192.168.20.0/24)
(e.g.
60
Advertisement
Table of Contents
