Table of Contents
Advertisement
TRENDnet User's Guide
Manual Firmware Upgrade
1. If a firmware upgrade is available, check the router model on our website
http://www.trendnet.com/support
2. Unzip the file to a folder on your computer.
Please note the following:
• Do not interrupt the firmware upgrade process. Do not turn off the device or
press the Reset button during the upgrade.
• If you are upgrade the firmware using a laptop computer, ensure that the laptop
is connected to a power source or ensure that the battery is fully charged.
• Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
• Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
• Any interruptions during the firmware upgrade process may permanently
damage your router.
© Copyright 2023 TRENDnet. All Rights Reserved.
and download the firmware to your computer.
1. Log into your router management page (see
on page 6).
2. Click on Management and click on Firmware / Configuration.
3. Depending on your web browser, in the Flash new firmware image section, click
Browse or Choose File.
4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it.
Note: The Keep Settings option will upgrade the firmware version and preserve your
existing configuration settings. Unchecking the Keep Settings option will upgrade the
firmware version and reset the device to factory defaults.
5. At the verification page, click Proceed. Please wait for the online firmware upgrade
procedure to complete successfully.
TEW-929DRU
"Access your router management
page"
85
Advertisement
Table of Contents
