General Operation; Turn Unit On/Off; Adjust Volume (Vol); Adjust Menu Options (Sel) - Ssl DDC28B User Manual

GENERAL OPERATION

Turn Unit On/Off

• Press any button on the front panel or on the remote control to turn on the unit.
• Press and hold the power (
on the remote control to turn the unit on or off.

Adjust Volume (VOL)

Rotate the VOL knob on the front panel or press the
control to increase or decrease the volume level.

Adjust Menu Options (SEL)

• Press the SEL button on the front panel or on the remote control
through the following adjustable audio functions: BASS, TREBLE, BALANCE, FADER, EQ
OFF/FLAT/POP/ROCK/CLASS, LOUD ON/OFF, DX/LOC, STEREO/MONO, VOL LAS / ADJ,
AREA US/EU, CLOCK 12/24, BEEP ON/OFF, VOLUME.
• Rotate the VOL knob on the front panel or press the
control to adjust the selected item.
- BASS/TREBLE:-07,-06, ~, -01,00,+01,~, +06,+07
- BALANCE:L07,L06,~, L01, 00, R01,~,R06,R07
- FADER:R07,R06~,R01,00,F01,~,F06,F07
- EQ(Equalizer) Setting:OFF, FLAT, POP, ROCK, CLASS
- Loudness: LOUD ON/OFF
- DX/LOCAL: Enables or disables the local broadcast mode (LOCAL).
- Stereo/Mono: Switches between MONO and STEREO reception mode for radio
frequencies.
- VOL(LAS/ADJ):This option allows you to preset a volume level as the power-on
memory volume level.
- VOL LAST: In this mode,the unit switches on at the actual volume it had when it
was last switched off.
- VOL ADJ: In this mode, the unit power on at the actual volume that you preseted
constant switch-on volume level.
Press the
the "A-VOL XX" will be shown on the LCD display.
Then you can adjust a constant switch-on volume level by rotating the
- AREA US/EU: This car radio is equipped the USA / Europe frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequecny setting in about 3 seconds.
- CLOCK 12/24:
This unit is equipped with two types of clock display formats, 12 and 24 hours.
Rotate the volume knob to choose 12 hours format or 24 hours format.
- BEEP ON/OFF:Enables or disables the "BEEP" signal to confirm use.
- Volume level: 00,01,~,40
) button on the front panel or briefly press the power (
SEL button to enter the constant switch-on volume adjusting mode and
VOL+ / VOL-
repeatedly to cycle
VOL+ / VOL-
) button
button on the remote
button on the remote
VOL knob.
5