Pc Interface Keyboard/Mouse (Long Distance) X27; Touch Interface X6 - Siemens SCD 1297-K Operating Instruction

2.3.6

PC interface keyboard/mouse (Long Distance) X27

This interface is used when the computer system and the control panel are separated by
more than 5m. The mouse and keyboard signals are transmitted via a common cable. A
standard CAT5/6/7 Ethernet cable with an RJ45 connector is used. If this interface is used
the PC must have a corresponding receiver which can convert the incoming signals back to
standard keyboard and mouse signals (see Fig. 5, page 50).
Pin Signal
1 KBD-DATA+
2 KBD-DATA-
3 MOUSE-DATA-
4 KBD-CLK+
5 KBD-CLK-
6 MOUSE-DATA+
7 MOUSE-CLK-
8 MOUSE-CLK+
2.3.7

Touch interface X6

The Touch will be connected via the RS232 interface.
Pin
1
2
3
4
5
6
7
8
9
Control panel SCD 1297-K
Signal
DCD
RXD
TXD
DTR
GND
DSR
RTS
CTS
RI
Page 48 / 66
Operating instruction
DOC-Nr.: b40010de1.doc