Download Print this page

Troubleshooting; Technical Specifications - Kärcher WV 2 Premium Manual

Hide thumbs Also See for WV 2 Premium:

Advertisement

also be washed in the washing ma-
chine at a temperature of up to 60°C
(without the use of fabric softeners).
Let the cleaned appliance dry prior
to assembly.
Charge the battery.
Storing the Appliance
Store the appliance upright in a dry
room.

Troubleshooting

Spray bottle does not spray
Refill detergent.
Pump mechanism in spray botte
defective, contact dealer.
Machine does not start
Check the charge/operations display:
No signal or slowly blinking signal:
Charge the battery.
With a rapidly blinking signal: In-
form your dealer.
Streaks while cleaning
Lightly press the device against the
glass, just slide over.
Hold the device at the correct angle
to the glass. This is achieved, when
the distance between the lower end
devices and the glass is about 10
cm.
Use KÄRCHER cleaning detergent,
because it is specially matched for
the window vac.
Adjust the dosing of detergent.
Spray sufficient liquid on the glass.
Glass must not be too dry.
Clean the squeegee regularly.
Reverse the used pull-off lip. Pull
the squeegee to the side. After-
wards wet the squeegee in the area
of the curve with water or detergent.
Slide the squeegee back in the
holder in reverse order.
Complete worn squeegee, take out
as described above and replaced
by a new lip.
The cleaning should not be done in
direct sunlight or excessive heat.
Water is leaking from the
side of the tank
Empty the waste water tank (max.
100 ml content).

Technical specifications

Type of protection
Volume of waste water
tank
Operating time with full
charge
Nominal battery voltage 3,7 V
Rated power of appli-
ance
Charging current for
empty battery
Output voltage, charger
Output current, charger
Sound pressure level
(EN 60704-2-1)
Weight
Battery type
Subject to technical modifications!
– 7
IP X4
100
ml
0
35
min
10
W
185
min
0
5,5 V
600
mA
0
50
dB(A)
0,6 kg
Li-Ion

Advertisement

loading