Table of Contents
Advertisement
KNOW YOUR DRILL=DRIVER
See Figure 1.
The safe use of this product requires an understanding
of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all
operating features and safety rules.
BIT STORAGE
Bits provided with the drill-driver can be placed in the
storage area, located on the base of the tool.
DIRECTION
OF ROTATION
SELECTOR
(FORWARD/REVERSE/CENTER
LOCK}
Your drill-driver has a direction of rotation (forward/
reverse/center
lock) selector located above the switch
trigger for changing the direction of bit rotation. Setting
the direction of rotation selector in the OFF (center lock)
position will lock the switch trigger to help reduce the
possibility of accidental starting when not in use.
KEYLESS
CHUCK
The keyless chuck allows you to hand-tighten
or release
the drill bit in the chuck jaws.
LEVEL
A level is located on the top of the motor housing to help
keep the drill bit level during use.
TORQUE
ADJUSTMENT
RING
Your drill has a 24-position
clutch. The torque adjustment
ring can be turned to select the right amount of torque for
your application.
TWO-SPEED
GEAR TRAIN (HI=LO}
The two-speed
gear train is designed for drilling or driving
at LO (1} or HI (2) speeds. A slide switch is located on top
of your drill for selecting either LO (1} or Hi (2} speed.
VARIABLE
SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with de-
creased trigger pressure.
UNPACKING
This product has been shipped completely assembled.
[] Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list
are included.
[] Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
[] Do not discard the packing material until you have
carefully inspected and satisfactorily
operated the tool.
[] If any parts are damaged or missing, please call
1-800-932-3188
for assistance.
PACKING
LIST
Drill-Driver
Double-ended
Bit (2)
Battery (2)
Charger
Bag
Operator's Manual
A
A
A
WARNING:
If any parts are damaged or missing
do not operate this tool until the parts are replaced.
Failure to heed this warning could result in serious
personal injury.
WARNING:
Do not attempt to modify this tool
or create accessories not recommended
for use
with this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
To prevent accidental starting that
could cause serious personal injury, always remove
the battery pack from the tool when assembling
parts.
Advertisement
Table of Contents
