Table of Contents
Advertisement
Function board
Description
Function board
Function board cable (included in Cable Kit)
Before removing the function board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Place the computer in "Battery Safe mode"
3.
Disconnect all external devices connected to the computer.
4.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
5.
Remove the following components:
a.
Service door (see
b.
Hard drive
c.
Keyboard (see
d.
Top cover (see
Remove the function board:
1.
Position the top cover upside-down.
2.
Disconnect the cable from the connector on the function board (1).
3.
Remove the Phillips PM2.0×3.0 screw (2) that secures the board to the top cover.
Service doors on page
(Hard drive on page
34)
Keyboard on page
43)
Top cover on page
50)
(Battery Safe mode on page
32)
Component replacement procedures
Spare part number
905710-001
905707-001
31).
57
Advertisement
Table of Contents
