Function Board - HP EliteBook 8560p Maintenance And Service Manual

Function board

Description
Function board
Before removing the function board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
Remove the function board:
1. Position the computer upside-down with the front toward you.
2. Remove the wireless cable from atop the board (1).
Downloaded from LpManual.com Manuals
Battery on page
Bottom door (see Bottom door on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
WLAN module (see WLAN module on page
WWAN module (see WWAN module on page
Fan (see Fan on page 85)
Heat sink (see Heat sink on page
Keyboard (see Keyboard on page
Bottom cover (see Bottom cover on page
58).
64).
69)
65)
76)
74)
86)
92)
94)
Component replacement procedures 103
Spare part number
641187-001