Figure 9. Remove the 2280 solid-state drive (for selected models)
Screw specifications
M2 x L3
Go to
https://support.lenovo.com/partslookup
part:
2280 solid-state drive (SSD)
Remove the thermal module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the deco cover" on page 30
"Remove the lower case" on page 31
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Step 2.
Disconnect the thermal module cable from the system board. Remove eight screws. Remove the
tape then remove the thermal module.
Number of screws
1
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
35