HDD
HDD cable
HDD bracket
Remove the memory module
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the memory shielding.
Figure 12. Remove the memory shielding
Step 3.
Open the buckles and then remove the memory.
Figure 13. Remove the memory
Go to
https://support.lenovo.com/partslookup
replacement parts:
Memory
Memory shielding
Remove the thermal module
Make sure the following FRUs (or CRUs) have been removed.
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
33