Figure 9. Remove the touchpad board mylar
Step 2.
Remove the touchpad board cable from the touchpad board and the system board.
Figure 10. Remove the touchpad board cable
Go to
https://support.lenovo.com/partslookup
part:
Touchpad board mylar
Touchpad board cable
Remove the thermal module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
"Remove the solid-state drive (SSD)" on page 30
Step 1.
Disconnect the fan cable from the power board and the system board. Then, release the cable from
the cable guide and loosen six screws.
32
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement