Ispring DS4S Installation Instructions & User Manual page 8

Warning

Never put anything flammable close to the dispenser.

This water dispenser is designed for indoor applications only.

Electric shock hazard: Do not overload sockets or extension cords.

Do not damage the refrigeration cooling system.

Do not touch the plug with wet hands to prevent electric shock.

Always disconnect the power cord before attempting to clean or move the dispenser.

ELECTRICAL REQUIREMENTS:
A 115 Volt, 60 Hz., AC only 15 amperes fused, grounded electrical supply is required. It is
recommended that a separate circuit serving only your Water Dispenser be provided. Use an outlet
that a switch cannot turn off.

GROUNDING INSTRUCTIONS:
For questions or concerns, call 1-678-261-7611 or email Support@123filter.com, or visit
Page 5

This appliance must be grounded. In an electrical short circuit,
grounding reduces the risk of electric shock by providing an
escape wire for electric current.

Improper use of the grounding plug can result in a risk of property
damage, the electric shock causing severe injury, even death.

This appliance is equipped with a power cord having a grounding
wire with a grounding plug and must be connected into an
adequately grounded polarized outlet. Consult a qualified
electrician if the grounding instructions are not entirely understood
or if doubt exists as to whether the wall outlet is properly
grounded.

If the wall outlet is a standard two prong outlet, it is your
responsibility and obligation to have it replaced with a properly
grounded 3-prong wall outlet.

Do not under any circumstances cut or remove the third (ground)
pin from the power cord plug.

Do not use adapter plugs or extension cords with this appliance.

If the power cord is too short, have aqualified electrician install an
electrical outlet near the machine.

Do NOT use the machine if the power cord becomes frayed or
otherwise damaged.
www.ispringfilter.com/support.
www.123filter.com | (678) 261-7611 | support@123filter.com