User Information - Ispring DS4S Installation Instructions & User Manual

The user must adhere to the installation specifications described in this Product Installation and
Operation Manual (hereinafter referred to as the "instruction manual"). iSpring is not responsible
for damage, loss, or injury resulting from neglect, improper maintenance, or unauthorized
modification of the unit.
● The unit should be placed only on flat surfaces. Do not mount on a wall.
● Use only authorized iSpring parts. Using unauthorized or aftermarket components will void the
product warranty.
● Unauthorized modification and disassembly are strictly prohibited and will void the warranty.
● Never touch the power cord connector when your hands are wet, as this may result in electric
shock.
● Never turn the dispenser upside down or tilt it more than 45 degrees. If the unit has been resting on
its side for a long time, place the water dispenser in the upright position for approximately 12 hours
before turning it on.
● Never use this dispenser with water that is unsafe to drink or is from an unknownsource.
● This water dispenser is equipped with a grounded power cord plug for your safety.
● Keep your water dispenser in a dry place away from direct sunlight.
● Leave a minimum of 2" (5 cm) around the back and sides of the dispenser for proper ventilation.
● Always install your water dispenser on a level floor. Please wait 3 minutes before restarting the
machine after shutting it down.
● Always unplug the water dispenser before servicing.
● Regular cleaning of your water dispenser is required for your warranty. Please follow the cleaning
instructions outlined in this manual and clean the dispenser every four months.
● The lower front panel must permanently be installed/positioned on the unit for proper operation.
Page 3

User Information

www.123filter.com | (678) 261-7611 | support@123filter.com