Control Panel Led Light Functions - Ispring DS4S Installation Instructions & User Manual

Red LED Light
1
(Hot Water)
Yellow LED
Light
2
(Water Level)
Blue LED Light
3
(Cold Water)
NOTE: The hot water heating system will not operate during the water level inside the
reservoir is low.
Page 7

Control Panel LED Light Functions

Off
The heating system is
off.
Activate the hot water
(red) switch on the
panel (page 6 #11).
The cooling system is
off.
Connect the power
cord (page 6 #14) to an
electrical outlet.
www.123filter.com
Flashing
Hot water is heating.
Water levels inside
the reservoir are low.
Check the water inlet
and the valves.
The cooling system
is cooling.
| (678) 261-7611 |
Hot water has
reached optimum
temperature, water
ready to dispense.
Water levels inside
the reservoir are
normal.
Coldwater has
reached optimum
temperature, and the
water is ready to
dispense.
support@123filter.com
Solid