Ispring DS4S Installation Instructions & User Manual page 13

(4) Dispensing Cold Water
This Water Dispenser left the factory with the cold water temperature control
default setting for Energy Star compliance. This setting will deliver cold water
temperatures between 4°C - 8°C (39°F - 46°F). The temperature can be
adjusted. Using a screwdriver, turn the dial clockwise between "
" " (colder) until the desired temperature is reached.
(5) Dispensing Hot Water
Warning: Hot water temperatures can reach 94˚C/201˚F and produce severe scalding. Never
let children dispense water without direct adult supervision.
NOTE: The hot water temperature is factory set and cannot be adjusted.
(6) Going Away on Vacation
To conserve energy, unplug the dispenser and drain the reservoirs when not using the dispenser for
long periods or when going on vacation (see Draining the Reservoirs, page 11). Follow Initial
Product Cleaning Procedures upon return and startup of the dispenser.
www.123filter.com | (678) 261-7611 |
" (cold) and
support@123filter.com Page 10