Advertisement
Advertisement
Table of Contents
Related Manuals for Ispring FG15B-KS
Summary of Contents for Ispring FG15B-KS
- Page 1 FG15B-KS USER MANUAL Ver.05/2020...
- Page 2 Copyright ©2005-2020 ISPRING WATER SYSTEMS, LLC. All rights reserved. Product Specifications Model FG15B-KS Flow Rate 3 - 15 GPM Peak Flow Rate 15 GPM Minimum Working Pressure 25 psi Maximum Working Pressure 80 psi Operating Temperatures 40-100 ºF (4 - 38 ºC)
- Page 3 Open the COLD-water faucet and run water for about 10 minutes to expel any carbon fines. Let the unit sit for several minutes, then repeat if necessary. 6. Turn off the faucet, and your system is now ready for use. NOTICE: The water will have a blackish color for the initial flush.
- Page 4 CAUTION: This step ensures the proper filter seal. Make sure the O-rings (ORB) are level when seated in the groove. If the O-ring appears damaged, stretched, or crimped, it should be replaced immediately. Step 3- Install the New Cartridge 3.1 Remove the new filter packaging and insert the filter cartridges into the housings, making sure they slip over the bottom standpipe.
- Page 5 Warranty Registration To register your product for its eligible warranty, please visit our website at 123filter.com and go to the “Warranty Registration” tab. We provide a 30-day money back guarantee, a 1-year manufacturer warranty, and lifetime tech support for all of our products. However, we do NOT access and store order information from websites other than 123Filter.com (including Amazon, Home Depot, etc.), so be sure to fill in that information upon registration of your system.
- Page 6 To best serve our customers, we like to recommend good plumbers throughout the USA.If you are happy with your installer, please iSpring Water Systems, LLC provide their information so that we can pass it on as a courtesy. 2480 Industrial Park Blvd,...
Need help?
Do you have a question about the FG15B-KS and is the answer not in the manual?
Questions and answers