Instant POT PRO PLUS User Manual page 17

Test run
Setting up your new Instant Pot Pro Plus for a test run is a great way
to familiarize yourself with how the multi-cooker works before you
actually cook a meal.
To perform a test run:
1. Add 3 cups water to the cooking pot.
2. Place the cooking pot into the multi-cooker base.
3. Place the lid on top of the multi-cooker base.
See 'How to close the lid' below
4. Press Pressure Cook.
5. Press Pressure to select High pressure level.
6. Press the minutes field to activate it, then turn the Control Dial
to select 5 minutes.
7. Press Keep Warm to turn off the Keep Warm setting.
8. Press the venting field to select Quick pressure release.
9. Press Start. The progress bar and Message Bar show Preheating.
10. When the pressure is ready, the Progress Bar shows Cooking and
Message Bar shows Don't Open Lid. When the timer reaches 00:00,
cooking stops.
11. Venting begins automatically. When all steam is released, the
Message Bar shows OK to Open Lid.
12. Open the lid.
See 'How to open the lid' below
13. Discard any remaining water, and then wash and dry the cooking
pot.
Now you're ready to cook a meal in your Instant Pot Pro Plus!
15
User Manual