Instant Pod Milk Frother 140-3456-01 Manual

INTRODUCTION

Welcome to your new Instant Milk Frother!
Make your morning a little more amazing. Be your own barista and create café-quality drinks.

WHAT'S IN THE BOX?

Instant^® Milk Frother

Illustrations are for reference only and may differ from the actual product.

Remember to recycle!

We designed this packaging with sustainability in mind. Please recycle everything that can be recycled where you live. Be sure to keep this User Manual for reference.

INITIAL SET UP

Before you begin creating your first at-home, café-style drink, follow these initial setup steps.

1. Remove the Instant Milk Frother and all accessories out of the box.
2. Remove all packaging materials from within and around the unit.
3. Plug in the frother base into a two-prong, Polarized outlet.
4. Follow the Initial cleaning steps before you begin frothing.

INITIAL CLEANING

It's important to clean the components before you begin frothing.

1. Remove the lid from the pitcher, put it aside.
2. Gently pull up on the frothing paddle at the bottom of the frothing pitcher.
3. Hand wash and rinse the lid and frothing paddle with dish soap and warm water.
4. Without immersing the pitcher in water, wash and rinse the inside of the frothing pitcher with dish soap and warm water.
5. Dry the lid, frothing paddle and pitcher with a soft, dry cloth.
6. Once dry, place the frothing paddle back into the pitcher by positioning the square end of the frothing paddle over the shaft at the bottom of the pitcher, and rotating the paddle until it aligns with the shaft, then push down paddle until is secure.

Now you're ready to start making froth for your favorite drinks!

YOUR INSTANT MILK FROTHER

Get familiar with your frother's controls and programs.

Control Panel

The Instant^® Milk Frother has a simple, two button-control panel.

Function

You can toggle between the programs to create different types of foams, perfect for your drinks.

Start/Cancel

Starts and stops a selected program.

Cold foam

Create cold, silky microfoam to top your cold brew.

Light, warm foam

This setting heats and froth milk for a café au lait and matcha lattes.

Thick, warm foam

You can create thick, rich and warm foam, perfect for topping a cappuccino.

Warming

Heat your drink without creating foam. This setting slowly stirs the frothing paddle to keep your drink from burning. This setting is great for warming milk, creating hot chocolate and more.

USING YOUR INSTANT MILK FROTHER

Non-dairy milk

The Instant Milk Frother allows you to make both light and thick froth, warm or cold, with dairy and dairy-free milks. However, not all milk alternative produce foam.
Use oat or soy milk when using the warm or cold foam setting.
Coconut milk will only produce foam with the cold foam setting. Keep in mind that frothing dairy-free milks may not produce the same results as dairy milk.

How to froth milk

Always use the freshest, coldest milk or milk alternative possible for best results. When frothing large quantities of milk, allow the frother to rest for 3 minutes after every 2 frothing cycles.

1. Ensure the froth paddle is securely in place at the bottom of the pitcher.
2. Remove the lid from the pitcher and pour your choice of milk into the pitcher. Do not overfill the pitcher as this may cause the milk frother to overflow when using a foam setting.
3. Place the lid on the pitcher and press down until secure.
4. Place the pitcher onto the base.
5. If the base is not plugged into an outlet, connect the plug into an outlet.
6. Press Function to toggle between programs.
7. Press Start/Cancel to begin.
8. To stop the program at any time, press Start/Cancel. Otherwise, the milk frother will stop on its own when the program ends.

Programs run for a maximum of 3 minutes.

CARE, CLEANING, STORING

Clean your Instant Milk Frother after every use to ensure the best possible results, and to prevent milk residue from burning onto the inside of the pitcher.
Always unplug the milk frother and let it cool to room temperature before cleaning. DO NOT use metal scouring pads, abrasive powders or harsh chemical detergents to clean the milk frother or any of its components. Let all parts dry thoroughly before use or before storage.

The pitcher and base contain electrical components. To avoid fire, electric shock or personal injury, DO NOT machine wash, rinse or immerse the milk frother base, pitcher, power cord or plug in water or other liquids.

LEARN MORE

There's a whole world of Instant Milk Froth information and help just waiting for you. Here are some of the most helpful resources.

Register your product

Instanthome.com/register

Contact Consumer Care

Instanthome.com
support@instanthome.com
1-800-828-7280

Replacement parts and accessories

Instanthome.com

Connect and Share

Product specifications

Documents / Resources

References

• Instant Brands Product Registration | Instant Home

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Instant Pod Milk Frother 140-3456-01 Manual