Care And Maintenance; Troubleshooting - Project Source W3012B Assembly Instruction Manual

Hinge Adjustment:
Side adjustment:
Using a Phillips screwdriver, rotate
screw (1) clockwise to move the door
left and counter-clockwise to move the
door right. Moves the door up to 2 mm.
MAINTENANCE
• To maintain the beauty of your finish, try to avoid direct sunlight on the cabinetry for extended periods
Of time. Use a window treatment to block direct sunlight if necessary.
• Avoid exposing the cabinet to extreme temperatures.
CARE AND CLEANING
• Periodically, remove dust from the cabinet surface with a clean, soft, and dry cloth. Cloth may be
Slightly dampened if necessary.
• Wood and laminate cabinets may be polished quarterly or as needed with an oil-free, non-silicon
Furniture polish. Wax-based polishes are not suitable as the build-up they create can be difficult to
remove and can attract dust.
• Clean any spills immediately with a clean, soft, and dry cloth.
• For regular cleaning, use a mild soap and water mixture on a clean, soft cloth. Remove as much of
The water mixture from the cloth as possible prior to use.

TROUBLESHOOTING

PROBLEM
Doors do not line up
Drawers do close correctly
Depth adjustment:
Using a Phillips screwdriver, rotate screw
(2) clockwise to move the door forward
and counter- clockwise to move the door
backwards. Moves the door up to 2 mm.
SOLUTION
1. Check the cabinet is installed, level and plum
2. Adjust the hinge as required
1. Check the cabinet is installed, level and plum
2. Adjust the drawer front as required
Height adjustment:
Using a Phillips screwdriver, rotate
screw (3) clockwise to move the door
upward and counter-clockwise to
move the door downward. Moves
the door up to 2 mm.
10
Door Assembly