Table of Contents
Advertisement
Introduction for buttons on remote controller
Left and right
fixed angle
button
E-HEATER
button
FAN button
SLEEP button
Press this button to set left and right swing status, the circula-
tion change is as follow:
This is a general remote controller, when receiving "
swing status is the same as "
swing status is the same as left and right swing.
Under heating mode, press this button, circulation change of
auxiliary heating status is as follow:
Auxiliary heating ON (display
After starting heating mode, the remote controller will automati-
cally restore to the auxiliary heating status set previously.
The function is only available for some models.
Press this button, circulation change of fan speed is as follow:
Under dry mode, it can only be operated under the fan speed
of .
Quiet function can only be started under cooling and heating
mode. Turbo can be started under cooling and heating mode.
Under air supply mode, health function (this model has no
health function) shall be started at the same time.
Under cooling mode, start the breeze function, circulation
change of fan speed is as follow:
Remark: when pressing the button of remote controller to
adjust the fan speed to "
panel will display "Low" fan speed; when adjusting to "
(speed 3) or "
when adjusting to "
"High".
Press this button, the sleeping status will be circulated in the
following sequence:
Turn off sleep
"; when receiving "
)
Auxiliary heating OFF(display
Auto auxiliary heating (no display)
Auto
Quiet
Turbo
" (speed 1) or "
" (speed 4), the panel will display "Medium";
" (speed 5), the panel will display
13
", the
", the
)
"(speed 2), IDU
"
Advertisement
Table of Contents
