Gree GSY09BXAE User Manual page 16

Introduction for buttons on remote controller
/ button
LIGHT button
COOL button
HEAT button
button
button
TIMER button
Up and down
fixed angle button
For every press of "-" or "+" button, the set temperature will
decrease or increase 0.5℃. Press "-" or "+" button for over 1
second, the temperature value will be changed quickly and the
information will be sent until the button is loose.
Press "-" and "+" button at the same time for 3 seconds to lock
or unlock the keyboard, after locking, the remote controller will
display the lock icon "
the lock icon will blink three times and the status is unchanged.
After unlocking the keyboard, the lock icon of displayer will
disappear.
Press this button to control the LED status on the displayer, the
circulation change is as follow:
LED on(display
LED off(no display)
Press this button, the air conditioner will conduct cooling mode.
Press this button, the air conditioner will conduct heating mode.
Press this button to start (display "
display " " icon) left and right swing function.
Remark: according to the comfort demand of air supply, the
swing range under different modes is different.
Press this button to start (display "
display " " icon) up and down swing function.
Remark: according to the comfort demand of air supply, the
swing range under different modes is different.
Press this button to set timer ON/OFF.
Press this button, the character of H and OFF (ON) will blink. At
this time, press "+" or "-" button to adjust timer (long press "+"
or "-" button, time value will change quickly), the setting range
is 0.5～24 hour(s); press this button again to confirm timer, the
character of H and OFF (ON) will not blink any more.
Press this button to set up and down swing status, the circula-
tion change is as follow:
", at this moment, touch either button,
) LED off(no display)
Auto LED(display
12
)
" icon) or shut down (no
" icon) or shut down (no