Delta Electronics VFD S 115V Series User Manual page 73

Chapter 5 Parameters|VFD-S Series
Output Signal when Frequency Attained
Applications
General application
Output Signal for Base Block
Applications
General application
Overheat Warning for Heat Sink
Applications
General application
Multi-function Analog Output
Applications
General application
5-16
Purpose
Provide a signal for
running status
Purpose
Provide a signal for
running status
Purpose
For safety
Purpose
Display running
status
Functions
When the output frequency is at the
desired frequency (by frequency
command), a signal is given for
external system or control wiring
(frequency attained).
Functions
When executing Base Block, a signal
is given for external system or control
wiring.
Functions
When heat sink is overheated, it will
send a signal for external system or
control wiring.
Functions
The value of frequency, output
current/voltage can be read by
connecting a frequency meter or
voltage/current meter.
Revision August 2008, SE09, SW V2.61
Related
Parameters
3-05~3-06
3-04
3-10
Related
Parameters
3-05~3-06
Related
Parameters
3-05~3-06
Related
Parameters
3-05