Table of Contents
Advertisement
Move
— Press the GREEN button to activate the
Move feature. Use the
channel you wish to move and press OK to check.
If you wish to move multiple channels at once, select
another channel and check in the same way. Repeat
as necessary.
Once all desired channels have been checked, use the
B
b
or
buttons to place the focus at the position to
which you wish to move the channels. The channels
will be inserted above the highlighted channel. Press
the GREEN button to execute the move.
Channels
Line No. 1/10
Pos.
Name
1
ABC ONE
2
ABC TWO
7
ABC THREE
30
CABC Channel
40
ABC NEWS 24
51
ABCi
822
AA
823
AC
Sort
— Press the YELLOW button. A confirmation
window will appear. Press
press OK.
Sort
Your existing channel order will be lost. Do you wish to
continue?
The Sorting Type selection window will appear.
Sort
Sorting Type
C
c
Press
or
to set the sorting type.
A-Z Sort Station name order (A to Z)
Number Position No. order (numerical sequence)
b
Press
to highlight Sort and press OK.
Standby Channel Update
If the Standby Channel Update is set to On, when the TV is in
standby mode, Digital Tuning is automatically executed and any
new channels are saved.
a
Select DTV Settings from the SETUP menu and press
OK.
b
b
Press
to select Standby Channel Update and use
C
c
or
to select On.
B
b
or
buttons to select the
TV
C
c
or
to select Yes and
Yes
Number
Sort
DVB Character Set
This feature allows you to manually select the character set
(Standard = Table 0, West = Table 5 or Latin alphabet 9) to be
used for DVB-C or DVB-T channels.
a
Select DTV Settings from the SETUP menu and press
OK.
b
b
Press
to select DVB Character Set and use
to select Standard, West or Latin alphabet 9.
Dynamic Scan
If the broadcast information has changed in your DVB-T
receiving area, the TV screen will display the message
"Broadcast information has changed. Would you like to
rescan now?". Please follow the message. If you do not wish for
the TV to detect changes and prompt you to rescan, you should
set this feature to "Off".
a
Select DTV Settings from the SETUP menu and press
OK.
b
b
Press
to select Dynamic Scan and use
select On.
Location setting
You can select either Home or Store mode. Home is
recommended for normal home use. Select Store when using the
television for displaying in a shop, etc.
a
Select Location from the SETUP menu.
b
C
c
Press
or
to select Home or Store.
Analogue switch-off
This is a digital television which is integrated to allow the use
of both digital and analogue services. However, during the
lifetime of this set it is very likely that analogue services will
be switched off to allow for more new digital services.
This 'switch-off' will happen in a number of phases, which will
be advertised in your area well in advance. It is recommended
that at each phase the television is re-tuned to ensure that
existing and new digital services can be viewed without
disruption.
19
SETTING UP YOUR TV
C
c
or
C
c
or
to
Advertisement
Table of Contents
