Set The Answer Delay; Set The Record Time; Remote Access - Philips D275 User Manual

Delete all old incoming messages
From the base
Press and hold on the base station in
standby mode.
All old messages are permanently
deleted.
From the handset
1
Press .
2
Select [ANS. MACHINE] > [DELETE ALL
OLD], then press
selection.
A confirmation request is displayed
on the handset.
3
Press to confirm or
previous menu option.
All old messages are permanently
deleted if you press
Note
You can only delete the read messages. No
deleted messages can be recovered.

Set the answer delay

1
Press .
2
Select [ANS. MACHINE] > [TAM
SETTINGS] > [ANSWER DELAY], then
press to confirm each selection.
3
Select [TIME SAVER], [2 RINGS], [4
RINGS], [6 RINGS] or [8 RINGS], then
press to confirm.
The setting is saved.
Note
Make sure that the answering machine
is switched on before this feature can be
applied.
EN 38
to confirm each
to return to
to confirm.
Tip
When you access the answering machine
remotely, you are recommended to set
the answer delay to [TIME SAVER] mode.
This is a cost effective way to manage your
messages. When there are new messages,
the answering machine picks up the call
after 2 rings; When there no message, it
picks up the call after 3 rings.

Set the record time

1
Press .
2
Select [ANS. MACHINE] > [TAM
SETTINGS] > [RECORD TIME], then press
to confirm each selection.
3
Select [60 S], [120 S], [180 S] or
[UNLIMITED], then press
The setting is saved.

Remote access

You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.
to confirm.