Set The Answer Delay; Set The Record Time; Remote Access - Philips M470 User Manual

Delete all old incoming messages
1. Press .
Select [ANS. MACHINE] > [DELETE ALL
2.
OLD], then press
selection.
the handset.
3. Press
previous menu option.
All old messages are permanently
deleted if you press
Note
You can only delete the read messages. No
deleted messages can be recovered.

Set the answer delay

1. Press .
Select [ANS. MACHINE] > [TAM
2.
SETTINGS] > [ANSWER DELAY], then
press
Select [TIME SAVER], [2 RINGS], [4
3.
RINGS], [6 RINGS] or [8 RINGS], then
press
The setting is saved.
Note
Make sure that the answering machine
is switched on before this feature can be
applied.
EN 38
When you access the answering machine
remotely, you are recommended to set
the answer delay to [TIME SAVER] mode.
messages. When there are new messages,
the answering machine picks up the call
after 2 rings; When there no message, it
picks up the call after 3 rings.
to return to

Set the record time

1.
2.
3.

Remote access

You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.
Tip
Press .
Select [ANS. MACHINE] > [TAM
SETTINGS] > [RECORD TIME], then press
Select [60 S], [120 S], [180 S] or
[UNLIMITED], then press
The setting is saved.
Note