Set The Answer Delay; Set The Record Time; Remote Access - Philips D2702B/90 User Manual

Delete all old incoming messages
From the base
Press and hold on the base station in
standby mode.
All old messages are permanently
deleted.
From the handset
1
Press .
2
Select [ANS. MACHINE] > [DELETE ALL
OLD]
selection.
on the handset.
3
previous menu option.
All old messages are permanently
deleted if you press
Note
deleted messages can be recovered.

Set the answer delay

1
Press .
2
Select [ANS. MACHINE] > [TAM
SETTINGS] > [ANSWER DELAY], then
3
Select [TIME SAVER], [2 RINGS], [4
RINGS], [6 RINGS] or [8 RINGS], then
The setting is saved.
Note
Make sure that the answering machine
is switched on before this feature can be
applied.
EN 38
Tip
When you access the answering machine
remotely, you are recommended to set
the answer delay to [TIME SAVER] mode.
messages. When there are new messages,
the answering machine picks up the call
after 2 rings; When there no message, it
picks up the call after 3 rings.

Set the record time

1
Press .
2
Select [ANS. MACHINE] > [TAM
SETTINGS] > [RECORD TIME], then press
3
Select [60 S], [120 S], [180 S] or
[UNLIMITED],
The setting is saved.

Remote access

when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The remote access PIN code is the same as
your system PIN. The preset PIN is 0000.